Flow meters for hydraulic test stands

The testing of hydraulic valves, pumps and cylinders covers a wide range of flows.  From full flow rates at pressure to small leakage rates, the wider the test stand’s capabilities the greater its ROI and usefulness in the plant.  By incorporating a hydraulic flow meter with a 1000:1 operating range into your test stand, you may reduce the number of test stands that you require.  At a minimum, a wide ranging flow meter will reduce the complexity of the stand with fewer sensors, piping or annual calibrations required.
 
A tight machined fit between the piston and the cylinder gives the Max family of piston meters the ability to measure accurately at 1/1000^th of their full flow range capability.  Such a meter can measure full flow through a valve or pump and still provide accurate information about the leakage rate through a drain valve or crankcase.
 
High end capabilities, up to 100 LPM are available through the Max Model 216 and up to 35 LPM through the Model 215.  Additional benefits include: the ability to measure any viscosity fluid without a need to adjust the meter k-factor,  an insensitivity to vibration and flow ripple and, if desired, the ability to measure bi-directional fluid flow.  The Max family of Piston meters have standard pressure ratings to 1000 psi and 3000 psi. And the entire family is available with a 0.2% linearity.

Related applications: