P213 Piston Flow Meter

Precision low flow meter Model P213

Flow range:  0.5 to 1800 cc/min (0 to 0.48 gpm)
Accuracy (at 3 cP): ± 0.2% of reading over a 200:1 range
Maximum Operating Pressure: 210 bar (3000 psi)
Displacement: 0.89 cc/rev (0.054 in3/rev)
Weight: 1.1 kg (2.4 lbs)
Recommend Filtration 10 micron (1250 mesh) 
Port Size: 1/8" NPT; #4 SAE or manifold
Fluids: Most non aqueous, hydrocarbon based fluids

Materials of Construction

Body: Stainless steel, type 303
Pistons: Nitride hardened stainless steel, type 303
Crankshaft: Stainless steel
Bearings: Stainless steel, type 440C
Seals: Viton® "O" rings - standard; Neoprene,
Perfluoroelastomer,Teflon® - optional

Transmitter Variations (dependent on model #)

P213 Frequency
Output Signal: 5V pulse (current sinking and quadrature, also available)
Output Resolution: 1000 pulses/cc
Temperature Rating*:  -40°C to 225 °C (195°F or 437°F)

P213 Analog
Output Signal:  ± 20mA or ± 10V
Output Resolution: 16 bit
Temperature Rating*:  -40°C to 225 °C  (195°F or 437°F)

*See spec sheets for temperature rating of each model 

Compliance: CE Certified, Ex-proof version available with ATEX/IECEx II 2 G Ex db IIB Tx Gb as well as UL, cUL certification for Class 1, Division 1, Groups C and D, Tx

Dimensional Drawing

Pressure Drop Curve


P213 Typical Applications

Used to control the flow or pressure of fluid to a hydraulic actuator or hydraulic motor for motion...
Meter Features:- Resolution to 0.001 cc- Drift free accuracy, for decades of service- Accuracy not...
Meter Features:- Compact and portable, ideal for over-the-road testing- Not affected by vibration-...
Meter Features:- Accurately measures intermittent flows- High resolution for measurements to...
Selective Catalytic Reduction (SCR) revolves around the use of a urea solution that is injected...
To achieve the highest possible accuracy, Max recommends the use of a single-meter fuel measurement...
In the last decade bio-fuel has transitioned from a laboratory scale experiment to a commercially...
Hydraulic valves, pumps and actuators face the most stringent testing of any industrial product....
Armed with accurate fuel efficiency data, the designer has the option of trading fuel payload for...
No matter which pump you use to inject chemicals, you still need a method to verify that the...
Steel and Aluminum mills that do not use flow meters are at a huge disadvantage. Oil coverage...
The industry standard for water concentrations in natural gas is less than 7 pounds per MMSCF....